RARECHEM AL BE 0498 - Names and Identifiers
RARECHEM AL BE 0498 - Physico-chemical Properties
Molecular Formula | C7H3ClF2O2
|
Molar Mass | 192.55 |
Density | 1.573±0.06 g/cm3(Predicted) |
Melting Point | 126-128°C |
Boling Point | 126-128°C |
Flash Point | 115°C |
Vapor Presure | 0.00427mmHg at 25°C |
pKa | 1.63±0.25(Predicted) |
Storage Condition | Sealed in dry,Room Temperature |
Refractive Index | 1.534 |
MDL | MFCD01631441 |
RARECHEM AL BE 0498 - Risk and Safety
Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin.
R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed.
R22 - Harmful if swallowed
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 - Wear suitable protective clothing.
|
Hazard Class | IRRITANT |
RARECHEM AL BE 0498 - Introduction
2-choro-3, 6-difluorobenzoic acid is an organic compound with the chemical formula C7H3ClF2O2. The following is an introduction to its nature, use, preparation and safety information:
Nature:
-Appearance: 2-Chloro-3,6-difluorobenzoic acid is white crystalline powder.
-Melting point: about 125-128 degrees Celsius.
-Solubility: Soluble in anhydrous alcohol, ether and chlorinated solvents.
Use:
-2-choro-3, 6-difluorobenzoic acid can be used as a raw material for the synthesis of other compounds. It can be used in the preparation of pesticides, fungicides and pharmaceutical intermediates.
-It can also be used as an additive for acid catalysts or reaction solvents in organic synthesis reactions.
Method:
There are many methods for preparing 2-Chloro-3,6-difluorobenzoic acid. One of the commonly used methods is to react 2-Chloro-3,6-difluorobenzoic acid with hydrochloric acid to obtain 2-Chloro-3,6-difluorobenzoic acid.
Safety Information:
- 2-Chloro-3,6-difluorobenzoic acid is an organic compound, you need to pay attention to safety when using and processing.
-It may cause irritation and damage to the skin, eyes and respiratory system. Therefore, you should pay attention to protection when touching, wear appropriate protective glasses, gloves and respiratory protection equipment.
-When using or storing, keep away from ignition and oxidizing agents.
-Pay attention to good ventilation during operation and avoid inhaling aerosols or dust particles.
Please note that before using any chemical, refer to the relevant safety information and chemical product instructions, and follow the operating procedures for safe operation.
Last Update:2024-04-09 20:48:19